1) Analog/Mixed-Signal
Design Engineer (ADC, ADE). Exp: 5-10 years. Location California USA
Analog/Mixed-Signal Design Engineer to join our
team and work onsite at our customer’s location in near Thousand Oaks,
California. The project duration is 3-6 months.
Requirements:
• Experience should include various Analog-to-Digital Converter (ADC) architecture designs.
• At least 5-10 years of production design experience is required.
• Cadence schematic capture, Analog Design Environment (ADE), and layout knowledge is required.
• B.S. or higher in Electrical Engineering or equivalent degree.
• Strong verbal communication skill.
Desirable:
• Experience with various ADC architectures is preferred.
• Experience designing CMOS/CCD image sensors is highly desired.
Requirements:
• Experience should include various Analog-to-Digital Converter (ADC) architecture designs.
• At least 5-10 years of production design experience is required.
• Cadence schematic capture, Analog Design Environment (ADE), and layout knowledge is required.
• B.S. or higher in Electrical Engineering or equivalent degree.
• Strong verbal communication skill.
Desirable:
• Experience with various ADC architectures is preferred.
• Experience designing CMOS/CCD image sensors is highly desired.
2) Lead Place & Route Engineer for 40nm projects.
Exp: 5-10 years. Location: California USA
Specific tool experience required:
• Magma - Talus, Tekton (STA), Synopsys -
Formality
• TCL and scripting
Required skills (must haves):
• P&R, STA , Formal Verification
• IR/EM drop; power analysis
Required skills (must haves):
• P&R, STA , Formal Verification
• IR/EM drop; power analysis
Project Description:
1.) Large 50M gates device, including analog RF target to run at 15-20GHz
2.) Large 37M gates device, including 13 power islands, fast SerDes interfaces
Duties and Responsibilities:
• work on complex block P&R and/or top level P&R
• assist leading and guiding block designers
• analyze and propose solution to meet timing closure and schedule
• assist in communicating with customer and manage expectations
Required skills (must haves):
• P&R, STA , Formal Verification
• IR/EM drop; power analysis
• Experience with advanced nodes (40nm and below)
Specific tool experience required:
• Magma - Talus, Tekton (STA), Synopsys - Formality
• TCL and scripting
• Synopsys Design Constraints. (SDC), DC & PrimeTime
1.) Large 50M gates device, including analog RF target to run at 15-20GHz
2.) Large 37M gates device, including 13 power islands, fast SerDes interfaces
Duties and Responsibilities:
• work on complex block P&R and/or top level P&R
• assist leading and guiding block designers
• analyze and propose solution to meet timing closure and schedule
• assist in communicating with customer and manage expectations
Required skills (must haves):
• P&R, STA , Formal Verification
• IR/EM drop; power analysis
• Experience with advanced nodes (40nm and below)
Specific tool experience required:
• Magma - Talus, Tekton (STA), Synopsys - Formality
• TCL and scripting
• Synopsys Design Constraints. (SDC), DC & PrimeTime
3) Manager
– Verification Service Projects. Exp: 5-7 years. Location Bangalore
Education/Experience:
1. 5-7 years of good quality experience
2. B.Tech/M.Tech from top-tier engineering college
3. Prior experience in delivering design/verification services
4. Prior experience with USB/MIPI is a plus
5. No frequent job changes
6. Preference for small company environment
Personal Characteristics:
1. Service mindset with maturity and self-confidence
2. Good communication skills
3. Detail oriented
4. Passionate about technology
Skills Required:
1. SystemVerilog/C/Verilog based test-bench development
2. Expertise in at least one major verification methodology (OVM/VMM/UVM)
3. Micro-arch design/development experience is a plus
4. FPGA prototyping/Emulation experience is a plus
1. 5-7 years of good quality experience
2. B.Tech/M.Tech from top-tier engineering college
3. Prior experience in delivering design/verification services
4. Prior experience with USB/MIPI is a plus
5. No frequent job changes
6. Preference for small company environment
Personal Characteristics:
1. Service mindset with maturity and self-confidence
2. Good communication skills
3. Detail oriented
4. Passionate about technology
Skills Required:
1. SystemVerilog/C/Verilog based test-bench development
2. Expertise in at least one major verification methodology (OVM/VMM/UVM)
3. Micro-arch design/development experience is a plus
4. FPGA prototyping/Emulation experience is a plus
To Apply and for detailed JDs:
Please send your profiles at artibhatia@embeddedcareers.com and or get registered at
embeddedcareers.com.
Arti
Bhatia
Marketing Executive
Embedded Careers
No comments:
Post a Comment